Home Shutterbug Strasse

A photographer's haven for the lastest in digital or traditional film cameras.

I know, I know!

205.188.209.103

There is no hole in the top cover. You will need to take the top cover off to adjust the meter. The adjustment is in the meter itself as there is no variable resistor. There is a slot cut into the meter and you will see the adjustment arm when you look at it. Be carefull or you'll wreck the meter.
HOWEVER,
the original battery for that camera was 1.35 volts. If you replaced it with a 1.5 volt battery it will change the meter reading. Check that first.

Contact me if you need more info
ScottH


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups
  • I know, I know! - ScottH 18:55:17 07/20/02 (0)


You can not post to an archived thread.