In Reply to: Re: a few questions ... posted by Aroc on April 28, 2004 at 08:11:41:
"Photo meter" is short for photographic light meter. Photographic light meters are used to measure incident or reflected light to calculate the correct exposure. They do not give direct readings in light units (foot-candles).As I said, you might be able to use a foot-candle meter held directly on the screen to give you an approximation of the actual foot-Lamberts. I'm afraid there is no equal in photography to the simple Radio Shack sound level meter.
Foot-candle meters are used in motion picture and video production for setting up lighting so that the light ratios remain within the desired production values. That is why you can find meters that read out in foot-candles.
Measurement instruments that read out in foot-Lamberts are laboratory level test instruments not needed for general photographic uses.
What I can do, is try out my PhotoResearch LiteMate III foot-candle meter with my rear projection Pioneer Elite and see if it appoximates the values given by Pioneer for screen brightness.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: a few answers - Dooby dooby do 14:15:32 04/29/04 (2)
- What you need - Dooby Dooby Dooby Do 06:01:37 04/30/04 (1)
- Re: thanks for all your help - Aroc 10:21:34 04/30/04 (0)