Small Boat Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

Return to Small Boat Forum

Small Boat Forum

Re: homemade outboard

216.227.162.177

[ Follow Ups ] [ Post Followup ] [ Thread: Display Email ] [ Small Boat Forum ] [ FAQ ]

KenOhki

(i)

In Reply to: Re: homemade outboard posted by machnumber2 on April 16, 2003 at 00:26:15:

Unfortunetly, No, not yet. its running, just not running well.
Congrats on the new Boat. 17 hundred is a pricey tag, but hopefuly it will prove its Value to you.

Follow Ups:

Re: homemade outboard - machnumber2 21:23:57 04/18/03 (7)
My new boat!
http://machnumber2.50megs.com/photos/boat/boat.html
- http://machnumber2.50megs.com/photos/boat/boat.html
- Re: homemade outboard - KenOhki 09:31:52 04/20/03 (6)
  Looks Good, when you putting it in the water?
  - Re: homemade outboard - machnumber2 22:10:36 04/20/03 (5)
    Tested the boat today. It worked great I am very happy with it. My wife and I sat next to eachother in the front, I was suprised by how much space it had, we were comfy. The motor started right up and it was very powerful when I opened it up. I would say this thing tops off at about 40+ mph. Unfortuanately I do not think I will be able to test the homemade outboard on this boat, I will have to move the existing motor and dont want to mess with it. It was a fun project though. Photos below
    http://machnumber2.50megs.com/photos/boat2/boat2.html
    - http://machnumber2.50megs.com/photos/boat2/boat2.html
    - Re: homemade outboard - KenOhki 12:59:56 04/21/03 (4)
      Looks like you might be able to mount the prodject next to the main motor. it will work if it isnt centered, most trolling or backup motors often sit to the side of the main motor anyway
      - Re: homemade outboard - machnumber2 19:12:18 04/22/03 (3)
        
        In Reply to: Re: homemade outboard posted by KenOhki on April 21, 2003 at 12:59:56:
        
        I looked at the rear and it does not look like there will be enough room for both motors. I can try to make the two square steel motor mount plates smaller then see if that helps. Or if it is easier, just take off the 30 hp motor and hook up the prototype.
        
        Re: homemade outboard - KenOhki 22:13:31 04/22/03 (2)
        
        In Reply to: Re: homemade outboard posted by machnumber2 on April 22, 2003 at 19:12:18:
        
        That will kinda suck if you have to remove the 30 to test the prototype. But then again, it isnt that big of a deal unmounting the 30. I can see it now, You will use it once, prove to yourself it works, take a few pictures, then remount the 30 and never look back hehehe.
        
        Re: homemade outboard - machnumber2 21:18:52 04/29/03 (1)
        
        In Reply to: Re: homemade outboard posted by KenOhki on April 22, 2003 at 22:13:31:
        
        That will probably happen, not the way I envisioned it orgiginally. Just a thought, if I sent this thing to you, would you be interested in using/testing it, maybe making improvements? Its really a heap of bad welding and leaking lower end but I am curious if it would work.
        
        Re: homemade outboard - KenOhki 14:20:39 04/30/03 (0)
        
        In Reply to: Re: homemade outboard posted by machnumber2 on April 29, 2003 at 21:18:52:
        
        Wonder what the shipping cost on that would be from California to Maine.
        If you shiped it up I can test it, and maybe make a modification or 2. I am pretty certain it will work. From what I understand, the only real hurdle left is stopping the lower unit from leaking. Hmm, well, that and the starter rope,, I dont have a cordless drill anymore.
        Personaly, I have been Eyeing this weed eater I got from the rubish heap the other day. Its either gonna become a 12 volt generator, or a outboard for my friends raft.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

You can not post to an archived thread.